|
Category
Tiger Jazz
LED Driver
Online Service
Contact Us
|
MDR-100
96W Single Output Industrial DIN Rail Power Supply MDR-100 series
Features: * Universal AC input / Full range
* Protections: Short circuit / Overload / Over voltage / Over temperature
* ZCS/ZVS technology to reduce power dissipation
* Cooling by free air convection
* Can be installed on DIN rail TS-35/7.5 .or 15
* DC OK relay contact
* No load power consumption<1W
* NEC Class 2, limited power source (for 24V,48V only)
* LED indicator for power on
* 100% full load burn-in test
* 3 years warranty Specifications:
MDR-100-12 MDR-100-24 MDR-100-48 OUTPUT DC VOLTAGE 12V 24V 48V CURRENT RANGE 0 ~ 7.5A 0 ~ 4A 0 ~ 2A RATED CURRENT 7.5A 4A 2A RATED POWER 90W 96W 96W RIPPLE & NOISE (max.) Note.2 120mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE 12 ~ 15V 24 ~ 30V 48 ~ 56V VOLTAGE TOLERANCE NOTE.3 1.0% 1.0% 1.0% LINE REGULATION 1.0% LOAD REGULATION 1.0% 1.0% 1.0% SETUP, RISE TIME NOTE.5 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 20ms/115VAC at full load INPUT VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF 0.95/230VAC PF 0.98/115VAC at full load EFFICIENCY (Typ.) 85% 86% 88% AC CURRENT (Typ.) 1.3A/115VAC 0.8A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC 60A/230VAC LEAKAGE CURRENT <1mA / 240VAC PROTECTION OVER LOAD 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER TEMPERATURE 90 10 (RTH2) detect on heatsink of power transistor Protection type : Shut down o/p voltage, re-power on to recover OVER VOLTAGE 15.6 ~ 18V 31.2 ~ 36V 57.6 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover DC OK SIGNAL(MAX.) Relay contact rating(max.): 30V/1A resistive ENVIRONMENT WORKING TEMP. -10 ~ +60 (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 SAFETY &EMC( SAFETY STANDARDS UL508, TUV EN60950-1 approved, design refer to NEC CLASS 2 (for 24V,48V only) WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:>100M Ohms/500VDC 25 70%RH EMI CONDUCTION & RADIATION Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A OTHERS MTBF 346K hrs min. MIL-HDBK-217F (25 ) DIMENSION 55*90*100mm (W*H*D) PACKING 0.42Kg; 30pcs/13.6Kg/0.82CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 6. Deating maybe needed under low input voltages, please check the derating curve for more detail.
Related Product
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Hangzhou Showland Power Co.,Ltd |
