|
MODEL
|
PPS-200-5
|
PPS-200-12
|
PPS-200-15
|
PPS-200-24
|
PPS-200-27
|
PPS-200-48
|
|
OUTPUT
|
DC VOLTAGE
|
5V
|
12V
|
15V
|
24V
|
27V
|
48V
|
|
RATED CURRENT
|
36A
|
16.6A
|
13.3A
|
8.3A
|
7.4A
|
4.167A
|
|
CURRENT RANGE
|
0 ~ 26A
|
0 ~ 12.5A
|
0 ~ 10A
|
0 ~ 6.25A
|
0 ~ 5.56A
|
0 ~ 3.13A
|
|
CURRENT RANGE (20.5CFM FAN)
|
0 ~ 36A
|
0 ~ 16.6A
|
0 ~ 13.3A
|
0 ~ 8.3A
|
0 ~ 7.4A
|
0 ~ 4.167A
|
|
RATED POWER
|
130W
|
150W
|
150W
|
150W
|
150W
|
150W
|
|
PEAK LOAD(10sec.)
|
180W
|
199.2W
|
199.5W
|
199.2W
|
199.8W
|
200W
|
|
RIPPLE & NOISE
|
100mVp-p
|
100mVp-p
|
100mVp-p
|
150mVp-p
|
150mVp-p
|
250mVp-p
|
|
VOLTAGE ADJ. RANGE
|
4.5 ~ 5.5V
|
10.8 ~ 13.2V
|
13.5 ~ 16.5V
|
21.6 ~ 26.4V
|
24.3 ~ 30V
|
43.2 ~ 52.8V
|
|
VOLTAGE TOLERANCE
|
4.0%
|
3.0%
|
3.0%
|
2.0%
|
2.0%
|
2.0%
|
|
LINE REGULATION
|
0.5%
|
0.5%
|
0.5%
|
0.5%
|
0.5%
|
0.5%
|
|
LOAD REGULATION
|
1.0%
|
1.0%
|
1.0%
|
1.0%
|
1.0%
|
1.0%
|
|
SETUP, RISE TIME
|
1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load
|
|
HOLD UP TIME
|
12ms/230VAC/115VAC at full load
|
|
INPUT
|
VOLTAGE RANGE
|
90 ~ 264VAC 127 ~ 370VDC
|
|
FREQUENCY
|
47 ~ 63Hz
|
|
POWER FACTOR
|
PF>0.93/230VAC PF>0.98/115VAC at full load
|
|
EFFICIENCY (Typ.)
|
86%
|
89%
|
89%
|
89%
|
89%
|
90%
|
|
AC CURRENT
|
2.2A/115VAC 1.2A/230VAC
|
|
INRUSH CURRENT
|
COLD START 70A/230VAC
|
|
LEAKAGE CURRENT
|
<2mA / 240VAC
|
|
PROTECTION
|
OVER LOAD
|
105 ~ 135% rated output power
|
|
Protection type : Hiccup mode, recovers automatically after fault condition is removed
|
|
OVER VOLTAGE
|
5.6 ~ 7.25V
|
13.8 ~ 16.2V
|
17.25 ~ 20.25V
|
27.6 ~ 32.4V
|
31.05 ~ 36.45V
|
57.6 ~ 67.2V
|
|
Protection type : Hiccup mode, recovers automatically after fault condition is removed
|
|
OVER TEMPERATURE
|
110 (TSW1) detect on heatsink of power transistor
|
|
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
|
|
ENVIRONMENT
|
WORKING TEMP.
|
-20 ~ +70oC (Refer to output load derating curve)
|
|
WORKING HUMIDITY
|
20 ~ 90% RH non-condensing
|
|
STORAGE TEMP., HUMIDITY
|
-40 ~ +85 oC, 10 ~ 95% RH
|
|
TEMP. COEFFICIENT
|
0.05%/ oC (0 ~ 50oC )
|
|
VIBRATION
|
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
|
|
SAFETY &EMC
|
SAFETY STANDARDS
|
UL60950-1, TUV EN60950-1 approved
|
|
WITHSTAND VOLTAGE
|
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
|
|
ISOLATION RESISTANCE
|
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
|
|
EMI CONDUCTION & RADIATION
|
Compliance to EN55022 (CISPR22) Class B
|
|
HARMONIC CURRENT
|
Compliance to EN61000-3-2,-3
|
|
EMS
IMMUNITY
|
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
|
|
MTBF
|
108.4Khrs min. MIL-HDBK-217F (25 )
|
|
DIMENSION
|
127*76.2*34.6mm (L*W*H)
|
|
PACKING
|
0.37Kg; 36pcs/14.3Kg/0.79CUFT
|
|
NOTE
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Heat Sink HS1,HS2 can not be shorted.
6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
|
