Category
Tiger Jazz
LED Driver
Online Service
Contact Us
|
PS-05
5W Single Output Switching Power Supply PS-05 series
Features: * Universal AC input / Full range * Low leakage current <0.5mA * Protections: Short circuit/Over load /Over voltage/Over temperature * Cooling by free air convection * 100% full load burn-in test * Fix switching frequency at 67KHz * Low cost * High reliability * 2 years warranty Specifications:
MODEL PS-05-5 PS-05-12 PS-05-15 PS-05-24 PS-05-48 OUTPUT DC VOLTAGE 5V 12V 15V 24V 48V RATED CURRENT 1A 0.45A 0.35A 0.22A 0.11A CURRENT RANGE 0 ~ 1.2A 0 ~ 0.5A 0 ~ 0.4A 0 ~ 0.25A 0 ~ 0.125A RATED POWER 5W 5.4W 5.25W 5.28W 5.28W RIPPLE & NOISE 100mVp-p 120mVp-p 120mVp-p 200mVp-p 200mVp-p VOLTAGE TOLERANCE 2.0% 2.0% 2.0% 2.0% 1.0% LINE REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% SETUP, RISE TIME 1000ms, 20ms HOLD UP TIME 100ms at full load INPUT VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY 47 ~ 63Hz EFFICIENCY (Typ.) 70% 75% 75% 76% 76% AC CURRENT 0.15A/115VAC 0.07A/230VAC INRUSH CURRENT COLD START 30A/230VAC LEAKAGE CURRENT <0.5mA / 240VAC PROTECTION OVER LOAD Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER TEMPERATURE Tj 140 typically (U1) Detect on main control IC Protection type : Hiccup mode, recovery automatically after fault condition is removed OVER VOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 17.2 ~ 20.2V 27.6 ~ 32.4V 55.2 ~ 64.8V Protection type : Shut down o/p voltage, re-power to recover ENVIRONMENT WORKING TEMP. -10 ~ +60oC (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85oC , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/oC (0 ~ 50oC ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY &EMC SAFETY STANDARDS EN60950-1 CB Approved by TUV WITHSTAND VOLTAGE I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; light industry level, criteria A MTBF 1271.1Khrs min. MIL-HDBK-217F(25 ) DIMENSION 75*40*20mm (L*W*H) PACKING 0.05Kg; 120pcs/6.25Kg/1CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Related Product
|