|
MODEL
|
SPV-150-12
|
SPV-150-24
|
SPV-150-48
|
|
OUTPUT
|
DC VOLTAGE
|
12V
|
24V
|
48V
|
|
CURRENT RANGE
|
0 ~ 12.5A
|
0 ~ 6.25A
|
0 ~ 3.125A
|
|
RATED CURRENT
|
12.5A
|
6.25A
|
3.125A
|
|
RATED POWER
|
150W
|
150W
|
150W
|
|
RIPPLE & NOISE (max.) Note.2
|
150mVp-p
|
150mVp-p
|
240mVp-p
|
|
VOLTAGE ADJ. RANGE
|
10 ~ 13.2V
|
20 ~ 26.4V
|
41 ~ 52.8V
|
|
VOLTAGE TOLERANCE
NOTE.3
|
1.0%
|
1.0%
|
1.0%
|
|
LINE REGULATION
|
0.3%
|
0.2%
|
0.2%
|
|
LOAD REGULATION
|
0.5%
|
0.5%
|
0.5%
|
|
SETUP, RISE TIME NOTE.5
|
800ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
|
|
HOLD UP TIME (Typ.)
|
16ms/230VAC 16ms/115VAC at full load
|
|
INPUT
|
VOLTAGE RANGE
|
88 ~ 264VAC 124 ~ 370VDC
|
|
FREQUENCY RANGE
|
47 ~ 63Hz
|
|
POWER FACTOR (Typ.)
|
PF>0.94/230VAC PF>0.98/115VAC at full load
|
|
EFFICIENCY (Typ.)
|
82%
|
83%
|
83%
|
|
AC CURRENT (Typ.)
|
2.5A/115VAC 1.25A/230VAC
|
|
INRUSH CURRENT (Typ.)
|
20A/115VAC 40A/230VAC
|
|
LEAKAGE CURRENT
|
<1mA / 240VAC
|
|
PROTECTION
|
OVER LOAD
|
105 ~ 150% rated output power
|
|
Protection type : Constant current limiting, recovers automatically after fault condition is removed
|
|
OVER TEMPERATURE
|
80 5 (TSW1 : detect on heatsink of power transistor)
|
|
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
|
|
OVER VOLTAGE
|
13.8 ~ 16.2V
|
27.6 ~ 32.4V
|
57.6 ~ 67.2V
|
|
Protection type : Shut down o/p voltage, re-power on to recover
|
|
FUNCTION
|
REMOTE CONTROL
|
4 ~ 10VDC power off, <0 ~ 0.8VDC power on
|
|
OUTPUT VOLTAGE TRIM
|
2.4 ~ 13.2V
|
4.8 ~ 26.4V
|
9.6 ~ 52.8V
|
|
ENVIRONMENT
|
WORKING TEMP.
|
-20 ~ +65oC (Refer to output load derating curve)
|
|
WORKING HUMIDITY
|
20 ~ 90% RH non-condensing
|
|
STORAGE TEMP., HUMIDITY
|
-40 ~ +85oC , 10 ~ 95% RH
|
|
TEMP. COEFFICIENT
|
0.03%/oC (0 ~ 50oC)
|
|
VIBRATION
|
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
|
|
SAFETY &EMC
|
SAFETY STANDARDS
|
UL60950-1, TUV EN60950-1 approved
|
|
WITHSTAND VOLTAGE
|
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
|
|
ISOLATION RESISTANCE
|
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
|
|
EMI CONDUCTION & RADIATION
|
Compliance to EN55022 (CISPR22) Class B
|
|
HARMONIC CURRENT
|
Compliance to EN61000-3-2,-3
|
|
EMS IMMUNITY
|
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
|
|
OTHERS
|
MTBF
|
207K hrs min. MIL-HDBK-217F (25 )
|
|
DIMENSION
|
215*115*50mm (L*W*H)
|
|
PACKING
|
1.1Kg; 12pcs/14Kg/0.92CUFT
|
|
NOTE
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Mean Well reserves the right to adjust this spec when deemed appropriate.
5. Derating may be needed under low input voltages. Please check the derating curve for more details
|
